{"title":"Devices and Sensors","description":"\u003cp\u003eBrowse our Devices and Sensors collection. New Arrival.\u003c\/p\u003e","products":[{"product_id":"adafruit-mini-gps-pa1010d-uart-and-i2c-stemma-qt","title":"Adafruit Mini GPS PA1010D - UART and I2C - STEMMA QT","description":"\u003cp\u003eThis miniature GPS breakout is only 1\" x 1\" (~ 25mm x 25mm) but houses a complete GPS\/GNSS solution with both I2C and UART interfaces. There's even an antenna on top, so it's plug and play!\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupport for GPS, GLONASS, GALILEO, QZSS\u003c\/li\u003e\n\u003cli\u003e-165 dBm sensitivity, up to 10 Hz updates\u003c\/li\u003e\n\u003cli\u003eUp to 210 PRN channels with 99 search channels and 33 simultaneous tracking channels\u003c\/li\u003e\n\u003cli\u003e5V friendly design and only 30mA current draw\u003c\/li\u003e\n\u003cli\u003eBreadboard-able, with 4 mounting holes\u003c\/li\u003e\n\u003cli\u003eUART \u003cem\u003eand\u003c\/em\u003e I2C interfaces, pick whichever you like most!\u003c\/li\u003e\n\u003cli\u003eRTC battery-compatible\u003c\/li\u003e\n\u003cli\u003ePPS output on fix ±20ns jitter\u003c\/li\u003e\n\u003cli\u003eInternal patch antenna\u003c\/li\u003e\n\u003cli\u003eLow-power and standby mode with WAKE pin\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe breakout is built around the MTK3333 chipset, a reliable, high-quality GPS module that can handle up to 33 simultaneous tracking channels, has an excellent high-sensitivity receiver (-165 dBm tracking!), and a built-in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 30 mA during navigation.\u003cbr\u003e\u003cbr\u003eBest of all, we added all the extra goodies you could ever want: an ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs on UART and I2C, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts, a green power LED and a tiny red PPS LED. The LED blinks at about 1Hz when a fix is found and is off when no fix.\u003c\/p\u003e\u003cp\u003eUnlike our Ultimate GPS modules, this module does not have the ability to connect an external antenna, it's designed to be as small as possible for compact projects.\u003c\/p\u003e\u003cp\u003eAs with all Adafruit breakouts, we've done the work to make this GPS module super easy to use. We've put it on a breakout board with the required support circuitry and connectors to make it easy to work with, and is now a trend we've added SparkFun Qwiic compatible \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e JST SH connectors that allow you to get going \u003cstrong\u003ewithout needing to solder.\u003c\/strong\u003e Just use a STEMMA QT adapter cable, plug it into your favorite micro or Blinka-supported SBC and you're ready to rock! \u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop. \u003cbr\u003e\u003cbr\u003eComes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. A CR1220 coin cell is not included, but we have them in the shop if you'd like to use the GPS's RTC\u003cbr\u003e\u003cbr\u003eWe have a nice fancy library for GPS usage for both Arduino and Python usage. A full tutorial is also available, which has tons of information about the module, how to use the data logger, example code for both CircuitPython \u0026amp; Arduino, and more\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eProduct Dimensions: 25.5mm x 25.4mm x 8.2mm \/ 1.0\" x 1.0\" x 0.3\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 5.0g \/ 0.2oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079471845487,"sku":"ooc1787257951249","price":20.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-mini-gps-pa1010d---uart-and-i2c---stemma-qt_1.jpg?v=1787257959"},{"product_id":"adafruit-lps33hw-water-resistant-pressure-sensor-stemma-qt","title":"Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT","description":"\u003cp\u003eSometimes you need to sense pressure in a damp or caustic environment. And sometimes you need to know the relative changes in pressure as well as the absolute pressure. For the times you need to do both (or either), the LPS33HW is the pressure sensor for you. Combining protection from water intrusion with support for high precision relative and absolute measurements, this sensor will do what you need. With drivers for CircuitPython, Arduino, and Raspberry Pi, and support for I2C or SPI (Arduino only SPI support, for now) you'll be measuring pressure in any situation in no time.\u003c\/p\u003e\u003cp\u003eAccording to ST, the LPS33HW is designed for and proven to protect electronic components from long-term exposure to harsh environments such as water mixed with chlorine, bromine, commercial washing detergent and fuels, solvents and chemicals. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings.\u003cbr\u003e\u003cbr\u003eThe LPS33HW has a 24bit pressure data and 16 bit temperature data, allowing it to deliver pressure readings with +\/- 0.1% hPa accuracy. It can measure from 260 to 1260 hPa and is able to withstand pressure up to 20 times its measurement range. To help you take measurements to your requirements, the LPS33HW also offers an adjustable data rate, as well as a low pass filter to remove noise from the signal. Finally, the onboard temperature compensation makes sure that your readings are always good and won't vary as the temperature changes.\u003c\/p\u003e\u003cp\u003eThis sensor has a metal port with a lip that can be used to install an O-ring. This model we found on McMaster seems to work well. We also stock the sister-product, the LPS35HW which is not ported. \u003cstrong\u003ePlease note the port is not a strong mechanical connection so make sure not to put side-shear force on it!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo make life easier so you can focus on your important work, we've taken the sensor and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather\/Raspberry Pi) or 5V (Arduino\/ Metro328) logic levels. Additionally since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included SparkFun qwiic compatible\u003cstrong\u003e STEMMA QT\u003c\/strong\u003e connectors for the I2C bus so \u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e Just wire up to your favorite micro and you can use our CircuitPython\/Python or Arduino drivers to easily interface with the LPS33ASAP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease Note: The sensor itself is advertised as Water\/Chemical Resistant, but the breakout board for testing out this sensor is not! If you want to use it in wet environments, you'll need to put the rest of the board in a waterproof epoxy!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the tutorial for example code for Arduino and CircuitPython, pinouts, assembly, wiring, downloads, and more!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressure sensor with water resistant coating\u003c\/li\u003e\n\u003cli\u003e260 to 1260 hPa absolute pressure range\u003c\/li\u003e\n\u003cli\u003e24-bit pressure data output\u003c\/li\u003e\n\u003cli\u003e16-bit temperature data output\u003c\/li\u003e\n\u003cli\u003eODR from 1 Hz to 75 Hz\u003c\/li\u003e\n\u003cli\u003eSPI and I²C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the tutorial for example code for Arduino and CircuitPython, pinouts, assembly, wiring, downloads, and more!\u003c\/p\u003e\n\u003cp\u003eProduct Dimensions: 25.7mm x 17.7mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 2.0g \/ 0.1oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472533615,"sku":"xye1787257952859","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-lps33hw-water-resistant-pressure-sensor---stemma-qt_1.jpg?v=1787257961"},{"product_id":"stemma-wired-tactile-push-button-pack-5-color-pack","title":"STEMMA Wired Tactile Push-Button Pack - 5 Color Pack","description":"\u003cp\u003eLittle clicky switches are standard input \"buttons\" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: These buttons use the larger original STEMMA conenction, not STEMMA QT!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach button comes with a candy-colored round cap snapped on. You get one of each color-- blue, white, yellow, red, and black.\u003c\/p\u003e\n\u003cp\u003eBest of all, each button board comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to Male Header Cables - 200mm, so wiring up is a cinch. Simply plug the cable in, then use the black wire to connect to your microcontroller\/microcomputer ground, white wire to the input signal pin and the red wire to your power pin (3V or 5V) if you want to have the pull-up resistor activated.\u003c\/p\u003e\n\u003cp\u003eIf you want to connect to something with alligator clips use our STEMMA to Gator cable. To connect to something with a STEMMA 3-pin connector already, use this cable.\u003c\/p\u003e\n\u003cp\u003eWorks great with any device that wants a switch - Arduino, CircuitPython, Raspberry Pi, DIY builds...etc!\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eSingle button PCB: 28mm x 21mm x 14mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472566383,"sku":"igz1787257953960","price":4.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/stemma-wired-tactile-push-button-pack---5-color-pack_1.jpg?v=1787257962"},{"product_id":"adafruit-lsm6ds33-6-dof-accel-gyro-imu-stemma-qt-qwiic-discontinued","title":"Adafruit LSM6DS33 6-DoF Accel + Gyro IMU (STEMMA QT \/ Qwiic) [Discontinued]","description":"\u003cp\u003eAdd motion and orientation sensing to your Arduino project with this affordable 6 Degree of Freedom (6-DoF) sensor with sensors from ST. The board includes an \u003cstrong\u003eLSM6DS33\u003c\/strong\u003e, a 6-DoF IMU accelerometer + gyro. The 3-axis accelerometer, can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The 3-axis gyroscope that can measure spin and twist. This chip isn't the newest motion sensor, but it is well-established and comes at a great price.\u003c\/p\u003e\u003cp\u003eTo make getting started fast and easy, we placed the sensors on a compact breakout board with voltage regulation and level-shifted inputs. That way you can use them with 3V or 5V power\/logic devices without worry. Both I2C and SPI interfaces are available, so you'll be able to use it with any hardware setup. The breakout comes fully assembled and tested, with some extra header so you can use it on a breadboard. Four mounting holes make for a secure connection.\u003c\/p\u003e\u003cp\u003eThis breakout does not include a magnetometer, often required for accurate orientation. We recommend the \u003cstrong\u003eLIS3MDL\u003c\/strong\u003e 3-axis magnetometer to match up with this IMU. We even have a version that contains both!\u003c\/p\u003e\u003cp\u003eAdditionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included SparkFun qwiic compatible\u003cstrong\u003e STEMMA QT\u003c\/strong\u003e connectors for the I2C bus so \u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e Just wire up to your favorite micro like the STM32F405 Feather with a plug-and-play cable to get 6 DoF data ASAP. \u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop. You can change the I2C address on the back using the solder jumper, to have two of these sensor boards on one bus.\u003c\/p\u003e\u003cp\u003eWe also wrote libraries to help you get these sensors integrated with your Arduino\/C++. This library contains an Arduino driver for the accel\/gyro. For advanced Arduino usage, ST has their own fully-featured library that includes extras such as FIFO management and tap detection for the LSM6DS3.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eLSM6DS33 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e±2\/±4\/±8\/±16 g full scale\u003c\/li\u003e\n\u003cli\u003e±125\/±250\/±500\/±1000\/±2000 dps full scale\u003c\/li\u003e\n\u003cli\u003eI2C or SPI hardware interface\u003c\/li\u003e\n\u003cli\u003eUp to 1.6 KHz ODR\u003c\/li\u003e\n\u003cli\u003eTap and double-tap detection\u003c\/li\u003e\n\u003cli\u003eFree-fall detection\u003c\/li\u003e\n\u003cli\u003eI2C Address 0x6A or 0x6B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472599151,"sku":"bjl1787257955168","price":5.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-lsm6ds33-6-dof-accel-gyro-imu-stemma-qt-qwiic-discontinued_1.jpg?v=1787257963"},{"product_id":"adafruit-lsm6dsox-6-dof-accelerometer-and-gyroscope-stemma-qt-qwiic","title":"Adafruit LSM6DSOX 6 DoF Accelerometer and Gyroscope (STEMMA QT \/ Qwiic)","description":"\u003cp\u003eBehold, the ST LSM6DSOX: The latest in a long line of quality Accelerometer+Gyroscope 6-DOF IMUs from ST.\u003c\/p\u003e\u003cp\u003eThis IMU sensor has 6 degrees of freedom - 3 degrees each of linear acceleration and angular velocity at varying rates within a respectable range. For the accelerometer: \u003cstrong\u003e±2\/±4\/±8\/±16 g\u003c\/strong\u003e at 1.6 Hz to 6.7KHz update rate. For the gyroscope: \u003cstrong\u003e±125\/±250\/±500\/±1000\/±2000 dps\u003c\/strong\u003e at 12.5 Hz to 6.7 KHz. There's also some nice extras, such as built-in tap detection, activity detection, pedometer\/step counter and a programmable finite state machine \/ machine learning core that can perform some basic gesture recognition.\u003c\/p\u003e\u003cp\u003eFor interfacing, you can use either SPI or I2C - there are two configurable interrupt pins. For advanced usage, you can attach additional devices to an external I2C\/SPI port - used for optical image stabilization.\u003c\/p\u003e\u003cp\u003eTo make getting started fast and easy, we placed the sensors on compact breakout boards with voltage regulation and level-shifted inputs. That way you can use them with 3V or 5V power\/logic devices without worry.\u003c\/p\u003e\u003cp\u003eWe also wrote libraries to help you get these sensors integrated with your Arduino\/C++ or CircuitPython\/Python boards such as Raspberry Pi or other single board computers.\u003c\/p\u003e\u003cp\u003eAdditionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included SparkFun qwiic compatible\u003cstrong\u003e STEMMA QT\u003c\/strong\u003e connectors for the I2C bus so \u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e Just wire up to your favorite micro like the STM32F405 Feather with a plug-and-play cable to get 6 DoF data ASAP. \u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eSchematics, diagrams, library and code examples, datasheets and more in the learning system guide!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Dimensions: 25.6mm x 17.8mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.7g \/ 0.1oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472631919,"sku":"rvz1787257956023","price":7.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-lsm6dsox-6-dof-accelerometer-and-gyroscope-stemma-qt-qwiic_1.jpg?v=1787257964"},{"product_id":"adafruit-ism330dhcx-6-dof-imu-accelerometer-and-gyroscope","title":"Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope","description":"\u003cp\u003e\u003cstrong\u003eThe ST ISM330DHCX delivers industrial-grade 6-DoF motion sensing with a 4000 dps gyroscope range, wide -40 to +105°C operating support, and easy I2C or SPI integration for Arduino, CircuitPython, Raspberry Pi, and more.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eBehold, the \u003cstrong\u003eST ISM330DHCX: an industrial quality Accelerometer + Gyroscope\u003c\/strong\u003e 6-DOF IMUs (inertial measurement unit) from ST.\u003c\/p\u003e\n\u003cp\u003ePlease ignore the \"ISM330DLC\" print on the PCB - Adafruit have confirmed that the chip is correct but the PCB silkscreen has the wrong part number on it.\u003c\/p\u003e\n\u003cp\u003eThis Adafruit IMU sensor has 6 degrees of freedom - 3 degrees each of \u003cstrong\u003elinear acceleration\u003c\/strong\u003e and \u003cstrong\u003eangular velocity\u003c\/strong\u003e at varying rates within a respectable range. For the \u003cstrong\u003eaccelerometer: ±2\/±4\/±8\/±16 g at 1.6 Hz to 6.7KHz update rate\u003c\/strong\u003e. For the \u003cstrong\u003egyroscope: ±125\/±250\/±500\/±1000\/±2000\/±4000 dps at 12.5 Hz to 6.7 KHz\u003c\/strong\u003e. In particular, this is one of the few gyro's we stock with \u003cstrong\u003e4000 dps range\u003c\/strong\u003e, usually they top out at 2000. This sensor has extra calibration and compensation circuits to give it excellent performance in a wide environmental \u003cstrong\u003erange from -40 to +105°C\u003c\/strong\u003e. Most other IMU sensors don't have industrial temperature ranges, or have wide accuracy variation as the temperature changes. The accelerometer and gyroscope also are on the same silicon die, which will keep the 6 measurements synchronized better than when the two sensors are on separate dies.\u003c\/p\u003e\n\u003cp\u003eThere are also some \u003cstrong\u003enice extras\u003c\/strong\u003e, such as built in\u003cstrong\u003e \u003c\/strong\u003etap detection, activity detection, pedometer\/step counter and a programmable finite state machine \/ machine learning core that can perform some basic gesture recognition.\u003c\/p\u003e\n\u003cp\u003eFor interfacing, you can use either \u003cstrong\u003eSPI or I2C\u003c\/strong\u003e - there's two configurable interrupt pins. For advanced usage, you can attach additional devices to an external I2C\/SPI port - used for optical image stabilization.\u003c\/p\u003e\n\u003cp\u003eTo make getting started fast and easy, we placed the sensors on compact breakout boards with voltage regulation and level-shifted inputs. That way you can use them with \u003cstrong\u003e3V or 5V\u003c\/strong\u003e power\/logic devices without worry.\u003c\/p\u003e\n\u003cp\u003eWe also wrote libraries to help you get these sensors integrated with your Arduino\/C++ or CircuitPython\/Python boards such as Raspberry Pi or other single board computers.\u003c\/p\u003e\n\u003cp\u003eAdditionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Just wire up to your favourite micro like the STM32F405 Feather with a plug-and-play cable to get 6 DoF data ASAP.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/INgt_r3AChI?si=5fWSkbaaXZ7KQxCU\u0026amp;start=255\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6-axis IMU with integrated accelerometer and gyroscope on same silicon die\u003c\/li\u003e\n\u003cli\u003eAccelerometer: ±2\/±4\/±8\/±16 g range, 1.6 Hz to 6.7 kHz update rate\u003c\/li\u003e\n\u003cli\u003eGyroscope: ±125\/±250\/±500\/±1000\/±2000\/±4000 dps range, 12.5 Hz to 6.7 kHz update rate\u003c\/li\u003e\n\u003cli\u003eIndustrial temperature range: -40°C to +105°C with excellent stability\u003c\/li\u003e\n\u003cli\u003eBuilt-in tap detection and activity detection\u003c\/li\u003e\n\u003cli\u003ePedometer\/step counter functionality\u003c\/li\u003e\n\u003cli\u003eProgrammable finite state machine for gesture recognition\u003c\/li\u003e\n\u003cli\u003eSPI or I2C interface with two configurable interrupt pins\u003c\/li\u003e\n\u003cli\u003eExternal I2C\/SPI port for additional devices (optical image stabilization)\u003c\/li\u003e\n\u003cli\u003e3V or 5V compatible with onboard voltage regulation and level shifting\u003c\/li\u003e\n\u003cli\u003eSparkFun Qwiic\/STEMMA QT connectors for tool-free I2C connection\u003c\/li\u003e\n\u003cli\u003eArduino\/C++ and CircuitPython\/Python libraries included\u003c\/li\u003e\n\u003cli\u003eCompact breakout board with pre-soldered components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematics and datasheets\u003c\/li\u003e\n\u003cli\u003eAdafruit 4502 Incorrect part number on PCB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope\u003c\/li\u003e\n\u003cli\u003e1x Header Strip\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472795759,"sku":"qcw1787257957318","price":14.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-ism330dhcx---6-dof-imu---accelerometer-and-gyroscope_1.jpg?v=1787257965"},{"product_id":"adafruit-icm-20649-wide-range-30g-4000dps-6-dof-imu-stemma-qt-qwiic","title":"Adafruit ICM-20649 Wide Range ±30g  ±4000dps 6-DoF IMU (STEMMA QT \/ Qwiic)","description":"\u003cp\u003eMost accelerometers have a similar range of measurements that they can make: often around 2G - 16G. Similarly, most gyros can measure in the range of 250 degree\/s to 2000 degrees\/s. That's enough for many situations, however, there are many situations where it's not quite enough. When measuring things like a golf swing, soccer ball kick or perhaps a fancy racing car, you need a bit more performance out of your motion sensor.\u003c\/p\u003e\u003cp\u003eThe ICM20649 from InvenSense is a Wide-Range 6-DoF accelerometer and Gyro, capable of measuring \u003cstrong\u003eup to ±30g and ±4000 dps\u003c\/strong\u003e! That's an impressive increase from the norm, about twice the range.\u003c\/p\u003e\u003cp\u003eIf you've found yourself limited by the standard ranges available, or if you just want to make sure the measurement range of your IMU is never an issue, pick up one of our handy ICM20649 breakouts.\u003c\/p\u003e\u003cp\u003eEach of our breakouts starts with the sensor of interest, and in this case, we begin with a hot-off-the-reel ICM20649 Wide-Range IMU. These chips are only a few mm across and have 0.4mm pitch contacts. To make it easier for folks to work with this chip, we've taken the sensor and mounted it on a breadboard-compatible breakout board.\u003c\/p\u003e\u003cp\u003eAlong with the sensor, the breakout board includes a voltage regulator and level shifting circuitry to allow you to use it with a range of devices nearly as large as its measurement ranges. Works great with the \u003cstrong\u003e3.3V logic level of a Feather or Raspberry Pi, or the 5v level of a Metro 328 or Arduino Uno\u003c\/strong\u003e, this breakout is ready to work with most common microcontrollers or SBCs. and since it speaks I2C, you can easily connect it up with two data wires plus power and ground. \u003c\/p\u003e\u003cp\u003eAs if that weren't enough, we've also added SparkFun qwiic compatible \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e connectors for the I2C bus \u003cstrong\u003eso you don't even need to solder.\u003c\/strong\u003e Just wire up to your favorite micro with a plug-and-play cable to get 6-DoF data ASAP. For a no-solder experience, just wire up to your favorite micro, like the STM32F405 Feather using a STEMMA QT adapter cable. The Stemma QT connectors also mean the ICM20649 can be used with our various associated accessories\u003c\/p\u003e\u003cp\u003eEasy wiring is nice, but even nicer is when it's combined with drivers and examples that are ready to go.\u003cstrong\u003e We wrote libraries and examples for Python and Arduino to make easy interfacing of the ICM20649 breakout.\u003c\/strong\u003e Together they'll get you measuring an astoundingly wide range of measurements in no time!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472828527,"sku":"bsz1787257958231","price":10.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-icm-20649-wide-range-30g-4000dps-6-dof-imu-stemma-qt-qwiic_1.jpg?v=1787257966"},{"product_id":"adafruit-lps25-pressure-sensor-stemma-qt-qwiic-lps25hb","title":"Adafruit LPS25 Pressure Sensor - STEMMA QT \/ Qwiic (LPS25HB)","description":"\u003cp\u003eWe live on a planet with an atmosphere, a big ocean of gaseous air that keeps everything alive - and that atmosphere is constantly bouncing off of us, exerting air pressure on everything around us. But, how much air is in the atmosphere, bearing down on us?\u003c\/p\u003e\u003cp\u003eThis absolute pressure sensor, \u003cstrong\u003eST LPS25HB\u003c\/strong\u003e can quickly and easily measure this air pressure, useful when you want to know about the weather (are we in a low pressure or high pressure system?) or to determine altitude, as the air thins out the higher we get above sea level. For example, at sea level, the official pressure level is \u003cstrong\u003e1013.25 hPa. \u003c\/strong\u003eYou can use this sensor to measure the current pressure where you are right now, to compare.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eLPS25\u003c\/strong\u003e has a wide measurement range of \u003cstrong\u003e260-1260 hPa \u003c\/strong\u003ewith 24-bit pressure data measurements that can be read up to \u003cstrong\u003e25 times a second (Hz)\u003c\/strong\u003e, you can be confident that you always have an up to date and precise measurement. It's pretty dang accurate too, with the ability to measure\u003cstrong\u003e within 0.2 hPa\u003c\/strong\u003e after calibration (± 1 hPa before calibration).\u003c\/p\u003e\u003cp\u003eThese days, helpful little sensors like the LPS25 are often quite little and tend to come in surface-mount packages that make them tricky to use with breadboards. With that in mind, we've taken the LPS25 and put it on a breakout board with level shifting circuitry and a voltage regulator. This means that not only can you use it with a breadboard, but you can use it with a wide range of devices that have either a \u003cstrong\u003e3.3V logic level\u003c\/strong\u003e, like a Raspberry Pi or CircuitPython compatible Metro M4 Express, \u003cstrong\u003eor with a 5V logic level\u003c\/strong\u003e device like a Metro 328 or Arduino Uno.\u003c\/p\u003e\u003cp\u003eFurthermore, we've included SparkFun Qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! All you need to do is plug in a compatible cable, wire it up to your device using one of our wiring diagrams and you're ready to write some code to start reporting measurements. \u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop. \u003c\/p\u003e\u003cp\u003eTo make the coding easier, we've written \u003cstrong\u003elibraries for Arduino\u003c\/strong\u003e and \u003cstrong\u003eCircuitPython or Python\u003c\/strong\u003e along with accompanying \u003cstrong\u003eexample code\u003c\/strong\u003e,  so all you have to do is gather your supplies and follow our instructions and you can know just how much air is sloshing around in your vicinity.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54079472861295,"sku":"gnv1787257959409","price":6.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/3376\/0111\/files\/adafruit-lps25-pressure-sensor---stemma-qt-qwiic-lps25hb_1.jpg?v=1787257968"}],"url":"https:\/\/popwearboutique.shop\/collections\/devices-and-sensors.oembed","provider":"My Store","version":"1.0","type":"link"}